Force™8 Half Face Mask with Typhoon Valve and A2P3 PressToCheck™ Filters (Twin Respirator) # F8-A2P3
Force™8 Half Mask with Typhoon™ Valve comes supplied with twin PressToCheck™ filters.
The Force™8 twin cartridge half mask with Typhoon™ valve offers superior low breathing resistance and a 4-point suspension harness with quick release buckles.
The mask is made with a durable thermoplastic rubber offering a superior fit to most face shapes.
The mask accepts the full range of low-profile Force™8 filters giving the Force™8 the flexibility to be used for many applications, providing filtering protection against particulates, many gases and vapours.
Features of the Force8™ Half Mask with Typhoon™ Valve:
- Typhoon™ Exhalation Valve: Low resistance exhalation valve for easy breathing, with stable mask configuration.
- Harness: Fully adjustable 4-point cradle suspension ensuring an effective facial fit, complete with quick release buckles.
- Comfort: Durable thermoplastic rubber mask offering a superior fit to most face shapes comfortably.
- CR2 Reflectivity: Reflective strips create increased visibility in low-light environments for added safety.
- Force™ Filters: Replaceable filter cartridges. Cost effective Force™8 filters available with low profile angle for minimum visual impairment.
- Conformity: Conforms to EN140 (Face piece), EN14387:2004 (Filter performance), EN143:200 (Filter performance)
- PressToCheck™ Filters: How can you be sure that you have donned your mask correctly?
- With the new patent pending Force™8 PressToCheck™ filters you can instantly check that you have the correct seal every time.
FIT IT!: Put the straps and harness over your head and pull the straps to a suitably tight and comfortable fit.
PRESS IT!: Press the front and backs of both filter covers together to stop air from entering through the filters.
CHECK IT!: Inhale. No air should come through the mask. Adjust the mask and repeat until it doesn't. Release when seal is made.
Features & benefits:
- Daily Face Fit Reassurance
- Passes dolomite
- Protection against construction dust
- Improved hygiene
- Inhalation valve for easy maintenance
- Low profile covers protect filters
- Conforms to EN143
PressToCheck™ filters are suitable for protecting your respiratory system from:
- Solvent-based painting
- Water-based painting/airbrushing
- Rubbing down paint
- Paint stripping
- White spirit
- Welding (ferrous and lead)
- Organic vapours and gases
- Dusts
- Mists
- Fibres and fibre glass
- Plaster
- Wood (hard and soft)
- Nuisance odours
Replacing the filters:
Replace the filters periodically.
If you start to smell the odour of the paint or it becomes difficult to draw air through the filter, then it is time to replace your cartridges.
Preferably replace them before this occurs to ensure you are fully protected.
This short video shows how to fit the filters correctly.
The video states the masks come attached as delivered, but please note that our stock is delivered with the face mask and filters separate so you will need to fit the filters as directed the first time.
PLEASE NOTE:
When installing the filters to your mask, please note that the filters do require a reasonable amount of force to be applied to rotate them into the “locked” position.
This is to ensure that the gasket between the filters and the mask body is well compressed and therefore sealing the interface efficiently.
When carrying out this operation, just take care not to grip the exhaust valve body inside the mask.
However, you may hold the overall mask body with the required force to rotate the filters into the “locked” position.
Do not twist both filters at the same time.
SKU | FM-F8-A2P3 |
---|---|
Manufacturer | eModels |
Short Description | Force™8 Half Face Mask with Typhoon Valve and A2P3 PressToCheck™ Filters (Twin Respirator) # F8-A2P3 |
Option 1:
ROYAL MAIL TRACKED ® (Standard Parcel)
Orders under £10.00 will be charged: £3.95
Orders over the value of £10.00 are only: £4.99
No matter how large or small the order is!
-----------------------------------------------
Option 2:
Evri (Tracking your parcel is easy)
Orders under £10.00 will be charged: £3.95
Orders over the value of £10.00 are only: £4.50
Evri Tracked 1-2 Days Delivery: £7.99
No matter how large or small the order is!
-----------------------------------------------
Option 3:
FEDEX (Next Day Delivery, Tracked & Insured)
All UK Next Day Delivery orders are only £8.95
Next Day delivery orders must be placed before 2pm.
This service does not deliver on a Saturday or Sunday. If you would like Saturday delivery please call us on 01782 409310.
-----------------------------------------------
Option 4:
DPD EXPRESS PARCEL (Next Day Delivery, Tracked & Insured)
All UK Next Day Delivery orders are only £9.50
Next Day delivery orders must be placed before 2pm.
This service does not deliver on a Saturday or Sunday. If you would like Saturday delivery please call us on 01782 409310.
-----------------------------------------------
Option 5:
Click & Collect from our Hobby Store
Please click here to view our contact details.
During the checkout process, you will also have the option to Collect from eModels ST3 5BW and it will exclude any shipping costs.
-----------------------------------------------
Option 6: Overseas Delivery Costs
All charges can easily be calculated prior to checkout.
Simply press the shopping basket button and select your country from the drop down menu.
This method is shipped tracked, insured and fast express for your convenience.
For deliveries outside the UK Vat of 20% will automatically be deducted from the price.
Import duty may be applied by the receiving country's customs.
We reserve the right to use which service we feel is most appropriate.
Please click here for our returns policy.