GodHand Nipper For Metal Wires Made In Japan # GH-SWN-125

GodHand make the best modelling tools in the world.

We're not just making that up - Pete, James, Festa and Foxx have sworn by them for years and we are ridiculously excited to be able to bring them to you now. They truly are tools that are at home whether they are in the hands of a beginner or a professional. These are not mass-produced throwaway tools; they are tools designed by and for master craftsmen that will enable you to create incredible art.

Strive for clean cutting of wires under 2mm diameter.

These nippers are specialized for metal wires, especially for modeling. The tip is for thin wire, the bottom is for thick wires. Clean cutting improves your work efficiency and you can cut super thin metal wire 0.042mm diameter without any deformation.

Nipper For Metal Wires
Product Code：GH-SWN-125

Quality Indication:
・Double edged nipper specialized for metal wires.
・Spring structure
・Length: 130mm / Weight: 65g / Soft grips
・Hardness of the edge: More than HRC56
・Nipper cap is included
・Specification is subject to change without notice.

Cutting ability

・Brass wire: Φ 0.2mm (at the tip)-Φ2mm (at the bottom)
・Can cut metal wire 0.042mm diameter without deformation.
・Copper wire: Φ0.2mm (at the tip)-Φ2mm (at the bottom)
・Aluminum wire: Φ0.2mm (at the tip)-Φ2mm (at the bottom)
・Stainless wire (not hardened one) under Φ0.5mm

⚠NOTE

・Do not cut materials not compatible with use.
・For your safety, please wear safety glasses.
・Please check the safety of your surroundings and that no fragile items are around before use.
・Do not touch the edge directly with your hands.
・Do not put excessive force especially at the tip, it may cause chipping and breakage.
・Please wipe off finger prints and stains and apply oil on the joint section and the tip to prevent rusting.
・Please keep away from children and store in a case.
・Please oil the joint section regularly to prevent the section from getting loose to avoid the decline of the cutting quality.
・Put the included nipper cap on after use.