GraphicAir Fume Master Extraction Unit for Aerosols, Airbrushes and more # A300S-D

Extraction Unit for Aerosols, Airbrushes and more.

The A300S-D contains, filters and extracts for a cleaner, healthier working environment for the hobbyist, modeller and arts and craft enthusiast.
NOTE: This unit exhausts air via flexi-duct to atmosphere.

Applications include filtration and removal of Aerosol paints, lacquers, adhesives (glue booth for spray mount) and airbrush over-spray. Solder fume, general solvent vapours and gases extracted to atmosphere. Filtration of grinding dusts, general particulates and powders etc.

Description:

Steel construction finished in dove grey – plastic replaceable spray/fume shield – particulate filter – centrifugal blower, external rotor motor type brushless, U, VDE and CSA approved – sealed electrical wiring and switch, downstream of filter. Flexi-duct 2 Meters x 100mm dia. – carry handle.

Operation:

All of our filtration and extraction systems carry a lifetime warranty, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on.

The flexi-duct can be fixed to a standard domestic vent or simply placed through a partially open window to facilitate portability or convenience. This unit can be used in two positions.

Horizontal position – for Spray Mount, aerosol lacquers and fixatives etc. applied to artwork placed onto the filter. Accommodates artwork up to A3 size.

Vertical position - For model sprays and airbrush use – light grinding particles (not sparking) – solder fume extraction and general solvent and gas extraction.

Filtration: The particulate (intake) filter is a three stage graduated fibre with a high 'dust' holding capacity for long life. Filtration to 5 micron particles. NB: Spray particulate sizes vary from 10 to 20 microns. The dual process of filtration and then extraction to atmosphere via flexi-duct, vastly reduces and/or eliminates operator exposure to potentially hazardous substances.

Specification:

Model Number: A300S-D
Fan Motor* Spec: 230V 50Hz 105W
Air Volume At Free Air: 255 m3/hr (150 CFM)
Ave. Air Velocity At Filter Face: 0.6 m/sec
Ave. Air Velocity At Shield Face: 0.50 m/sec
Noise Level LAeq dB(A): 58
Weight: 10 kgs
Dimensions: w = 565mm, h = 390mm, depth = 430mm
110 Volts 50 or 60Hz available if required
This unit is designed for studio/workshop cleanliness and for immediate operator protection from concentrations of airborne contaminants. It is not recommended for continual usage, i.e. production applications.